Flow Characteristics around Rectangular Obstacles with the Varying Direction of Obstacles
The study aims to understand the surface pressure distribution around the bodies such as the suction pressure in the leading edge on the top and side-face when the aspect ratio of bodies and the wind direction are changed, respectively. We carried out the wind tunnel measurement and numerical simulation around a series of rectangular bodies (40d×80w×80h, 80d×80w×80h, 160d×80w×80h, 80d×40w×80h and 80d×160w×80h in mm3) placed in a deep turbulent boundary layer. Based on a modern numerical platform, the Navier-Stokes equation with the typical 2-equation (k-ε model) and the DES (Detached Eddy Simulation) turbulence model has been calculated, and they are both compared with the measurement data. Regarding the turbulence model, the DES model makes a better prediction comparing with the k-ε model, especially when calculating the separated turbulent flow around a bluff body with sharp edged corner. In order to observe the effect of wind direction on the pressure variation around the cube (e.g., 80d×80w×80h in mm), it rotates at 0º, 10º, 20º, 30º, and 45º, which stands for the salient wind directions in the tunnel. The result shows that the surface pressure variation is highly dependent upon the approaching wind direction, especially on the top and the side-face of the cube. In addition, the transverse width has a substantial effect on the variation of surface pressure around the bodies, while the longitudinal length has little or no influence.
 Castro I. P. & Robins A. G. (1977). “The flow around a surface mounted cube in uniform and turbulent streams”, J. Fluid Mech. 79, 307-335.
 Tieleman H. W. & Akins R. E. (1996). “The effect of incident turbulence on the surface pressures of surface-mounted prisms”, J. Fluids and Structures. 10, 367-393.
 Richards P. J., Hoxey R. P., Connell B. D. & Lander D. P. (2007). “Wind-tunnel modelling of the Silsoe cube”, J. Wind Eng. Ind. Aero. 95, 1384-1399.
 Jochen F. & Dominic V. T. (2008). “Hybrid LES/RANS methods for the simulation of turbulent flows”, J. Progress in Aerospace Sciences, 44(5), 349-377.
 Lim H. C., Castro I. P. & Hoxey R. P. (2007). “Bluff bodies in deep turbulent boundary layers: Reynolds-number issues”, J. Fluid Mech. 571, 97-118.